Trailer Hub for Boat Trailer with 3-1/2 Inch Deep Hub
Updated 07/24/2019 | Published 07/23/2019
Question:
I need to know if the hub depth is 3 1/2inch deep? I currently have a loadrite boat trailer with BT151A wheel hubs. These are short hubs and cant seem to find any that will fit my trailer.
asked by: Marc L
Expert Reply:
The Trailer Idler Hub Assembly part # AKIHUB-545-2-LFEZ-1K is 4-1/2" deep. The issue you are running into is pretty common on older boat trailers because they use a much shorter spindle than most trailers today and unfortunately, theses hubs are very hard to find. If you can get me your spring center and hub face measurements (see photo) then I can go about getting you a new axle but that is pretty much your only option.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What is the Overall Length of AKIHUB-440-2-G-1K
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Search Results: grease seal
- Q&A: Looking for Hub to Fit 1 inch Diameter Spindle that is 3.5 inches Long
- Search Results: trailer hubs and drums accessories and parts
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Q&A: Availability of 4 on 4 inch Bolt Pattern Hubs for a Spindle with 1 inch Inner and outer Bearings
- Q&A: Replacement Hubs for 2,700 lb Axle
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - KE57JV
- Video: Let’s Check Out the Americana Trailer Wheel Lug Nut
- Search Results: bearing grease
- Search Results: 10~9 seal
- Search Results: loom
- Search Results: castle nuts
- Video: A Closer Look at the LED Combination Tail Light Kit for Trailers under 80" Wide
- Video: What to Know About the Miro-Flex Thinline LED Trailer Clearance or Side Marker Light
- Video: Review of TowSmart Wiring - Wire Loom 10 Foot - TS49QR
- Video: Comprehensive Review: Optronics LED Clearance or Side Marker Light
- Video: All About the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hub For Reliable Model BT-150A “short” Hub
- Shop: Timken Replacement Trailer Wheel Bearing - L44649 - Qty 1
- Shop: Grease Seal - Double Lip - I.D. 1.500" / O.D. 1.987" - 2,000-lb to 2,500-lb Axles - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12" - 5 on 4.5 - Pre-Greased
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Q&A: How to Measure Trailer Spindle & Hub to Determine Grease Seal Dimensions
- Article: How to Measure Your Trailer Wheel Bolt Pattern