Looking For New Brakes And Hubs For 2018 Towmaster T-12DT Trailer With Dexter 7,000 lb Axles
Updated 09/12/2025 | Published 08/26/2025
Products Featured in This Question
Question:
I have a 2018 Towmaster T-12DT that came with two Dexter 7000lb torsion axles. 16” wheel 8x6.5. I’m looking for drums with bearings and brake backing plates all around. I see lots of options. What ones do I need? Also do you carry fenders for it? Thanks
asked by: Sage W
Expert Reply:
Hello Sage, thanks for reaching out. We do carry hubs and brakes for the Dexter 7K axles. They use a standard brake size and bearing size. The only thing I would want to confirm is your stud size. They SHOULD be 9/16" but I would want to make sure. If you can provide the casting number from the current drums, I should be able to use that to confirm the specs. Assuming they are 9/16" studs, here is what I recommend:
- etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA
- Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # AKHD-865-7-1-K
The brakes are sold as a pair, and the hubs are sold individually. Keep in mind new brakes and hubs will need to be broken in or bedded. You can find those steps in the article I linked below.
As far as the fender, we do carry tandem axle fenders that may work. Can you tell me the length and height of the current fenders? I can see if we have anything to match.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Trailer Brakes are Very Weak Even After Adjusting Them
- Q&A: What is the Difference Between Self-Adjust and Nev-R-Adjust
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Q&A: Replacement Hub and Drum assembly for ALKO 8480
- Article: Trailer Wiring Diagrams
- Q&A: Tool to Drive in 2.72" Hub Dust Caps
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Looking For Replacement For 8-219 Hubs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Trailer Maintenance Schedule
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Jesse M.
9/12/2025
Hey Sage, did you have a chance to confirm the stud size on your Dexter axles? I'm eager to hear how the hub and drum assembly worked out for you, as it could help others with similar setups.