Replacement Hubs for Carry-On Steel Trailer With Straight Spindles
Updated 09/12/2025 | Published 08/20/2025
Products Featured in This Question
Question:
I have an old carry-on mesh steel trailer with 1 1/16 spindles. Which new hubs would fit this. The inside diameter of grease seal is 1.5 in. It’s a 5 on 4.5 bolt pattern. Thanks
asked by: Jon B
Expert Reply:
Hi Jon; thanks for those measurements. Assuming you are looking for idler hubs you can use the Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels # AKIHUB-545-2-2K or Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-2K. If you have brakes and need a hub and drum assembly you can use the # AKHD-545-2-2K.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: 7" brakes
- Search Results: 7 x 1~3/4 inch drum trailer brakes
- Search Results: 7 x 1~1/4 inch drum trailer brakes
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Breaking Down the Trailer Hub and Drum Assembly
- Q&A: Hub and Drum and Brakes for Trailer With 2,000 lb Axles & Bearings L44649
- Shop: Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs - 10 Pairs
- Q&A: Replacement Brakes, Hub and Drum Assembly with L44649 Inner and Outer Bearings on 2000lbs Axle
- Q&A: What Hardware Needed to Mount 7-Inch Trailer Brake Assembly
- Q&A: Replacement Idler Hub and Hub Drum for 2,000 lb Trailer Axle
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Q&A: Recommended Bearings for a Ranger Boat Trailer
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Q&A: Can Hub and Drum Assembly AKHD-545-2-2K Use 14 or 15 Inch Wheels?
- Q&A: What Size Wheels are Compatible with Electric Trailer Brake Kit # AKEBRK-2
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Video: All You Need to Know About the TruRyde Electric Brake Assembly
Robin H.
9/12/2025
Hi Jon, did the idler hub assembly work out for your trailer? I'm curious to know if it was the right fit for you, as it could help others with similar trailers.