Instructions for Converting Yakima HullRaiser to HullRaiser Aero

Question

Question:

Can you send me instructions to install the conversion kit from the hullraiser to the aero?

asked by: Benji T

0

Expert Reply:

There are indeed instructions for the HullRaiser Aero that you can use to install conversion kit # Y8860031. I will send them to you in a separate email. Also I have included a picture showing how the parts all lay out together.

expert reply by: Michael H

0

click to enlarge

David N.

7/29/2020

I have a 2014 Subaru Impreza with aero bars and in their oval shape there is a slant from front to rear. Despite many attempts, I have not managed to install my hullraiser J Cradles (with my conversion kit) without a very slight tilt front to rear. Suggestions? Thanks!

Jon G.

8/7/2020

Most OEM roof racks will have a little slant to them because the manufacturers tend to stick with the contour of the roof. If you want to make sure that your roof rack accessories sit level then I recommend swapping out your OEM roof rack for a Yakima aftermarket roof rack (see attached link). Yakima has some adjustments built into the roof rack legs to help level out their crossbars which is a huge reason why I really like their systems.

Helpful Links

roof-2014_subaru_impreza.htm?furl=-pm-yakima

Answer 1

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars.

view full answer...

Answer 2

Hello Alex, thanks for reaching out. It sounds like you are on the right track here, because the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031 is exactly what you need to allow your HullRaiser to fit the aero bars on your Subaru. You…

view full answer...

Answer 3

Since you have a Yakima Hullraiser and need to fit them on aero bars the best solution is the Hullraiser Aero kit part #Y8860031 as this is what Yakima recommends. The MightyMounts are a great solution for other racks that don't have specific…

view full answer...

Answer 4

I checked with Yakima and the Mako Saddles and Yakima HullyRoller Roof Rack Kayak Carrier Y04035 will require you to use the Universal MightyMounts #Y03590 with your '19 Ridgeline; the other mounts you mentioned would not work. If you were…

view full answer...

Answer 5

I was unable to find the dimensions of the CargoLoc crossbars, but it looks like they are aero shaped. What you can do is mount your HullRaiser to them with the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. The other option you may…

view full answer...

Answer 6

Hey Lee, are you trying to adapt the Hullraiser to fit aero shaped crossbars? If so we have a solution for that with the Hullraiser Aero Kit part #Y8860031. The MightyMounts are a great solution for other racks that don't have specific conversion…

view full answer...

Answer 7

Hey Kevin, The Universal MightyMounts #Y03590 would connect to the HullyRollers using the included carriage bolt running down through one of the two bolt holes on the roller brackets on each side. I'd offset the mounts on each roller for more…

view full answer...

Answer 8

Yes, I do have a solution for you. You will be able to get more use from your Yakima HullRaiser kayak carrier if you add two of the Yakima HullRaiser to HullRaiser Aero Conversion Kit, part #Y8860031. You can convert your old HullRaiser to a…

view full answer...

Answer 9

We do have something which you should be able to make work, though it is not the HullRaiser Conversion Kit you referenced. Instead, the best option outside of a new cargo box is going to be the Replacement Hardware Kit for Searsbox Cargo Box #TH05603…

view full answer...

Answer 10

In order to install the Yakima HullyRoller Roof Rack Kayak Carrier part Y04035 on the roof of your 2015 Jeep Grand Cherokee using the the Thule AeroBlade Edge Roof Rack part #TH7602B-TH7602B, you will need to use the Universal MightyMounts for Yakima…

view full answer...

Answer 11

The Mighty Mount 39H #Y03539 and 23H #Y03523 Accessory Adapters are pretty much the same thing and will be compatible with 3-1/8" wide x 1" tall crossbars. The biggest difference between these adapters is that the 39H is designed…

view full answer...

Answer 12

Hey Lisa, so I checked with Yakima and the correct MightyMounts for your 2011 BMW 328i with OEM Crossbars is the Universal set part #Y03590 and not the part number you mentioned.

view full answer...

Instructions for Converting Yakima HullRaiser to HullRaiser Aero

Product Page this Question was Asked From

Continue Researching