Result: yakima baseline

Measure the distance between the feet or raised rails on the roof of your vehicle and pick out the Yakima fairing that falls right under that dimension in overall length. We have the part #Y05018 which measures 46 inches long, the part #Y05017 which…

I may have some solutions for you, but there are not any ladder racks available for a 2020 Honda Ridgeline and there are not any tonneau covers that are compatible with an over the bed style rack system. However, you can use a tonneau cover and roof…

If you have the current version of the Thule Hullavator like what you referenced part #TH898 it comes with the needed hardware to install into the top crossbar channels of the bars you sent in a picture of. We have them as a replacement part…

The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…

You do have the correct Landing Pad, but you will need the 60 inch Yakima HD bars on your 2023 Toyota RAV4 to use and fit a pair of the Thule Hullavator Pro Kayak Carriers #TH898. Here are all the parts you'll need for the Yakima HD roof rack on…

Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading part #TH898 can be installed on factory cross bars as long as they are square, aerodynamic or round bars. You do want to have 4-8" of bar overhang in order for the…

The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs part #Y04081 can accommodate boats up to 28" wide with the kayak saddles and boats up to 36" wide with the paddle board saddles, both saddles are included. In order to…

The Hullavator Pro Kayak Carrier #TH898 can be installed around square crossbars or onto T-track crossbars like the Yakima JetStream Crossbars #Y00425. I attached the detailed installation instructions below. A quick summary though is to install the…

For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs #TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give…

There is not a general restriction from Thule that says two Hullavator Kayak Carriers #TH898 can't be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity…

Since you already have the necessary round bars to mount the Thule Hullavator item #TH898 to the roof of your Highlander, you will just need the parts listed below. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item…

I do have an option for you but there is not any sort of adapter that will allow the Thule Hullavator Kayak Carrier TH897 to be used with the Yakima CoreBar Crossbars like part #Y00423. The most cost effective option I have for you to use the Thule…