Permanent PWM Filter for 2024 Ford F-250 and Furrion Vision S Camera System

Updated 08/23/2025 | Published 08/04/2025

Products Featured in This Question

12V PWM Filter for RV Backup Camera Systems - Hardwire

(219)

$67.09

7-Way Vehicle Power Adapter for Furrion RV Observation Camera

(602)

$65.95

Question:

I have a 2024 Ford F-250 pulling a 26ft TT with a Furrion Vision S observation camera. Im getting periodic loss of signal on the monitor. From what I have read, this seems to be the best permanent solution versus the 7 way vehicle adaptor. Will this do the trick in my F-250?

asked by: Randy

Expert Reply:

Hey Randy! That is correct. The 12V PWM Filter for RV Backup Camera Systems # VGR64VR is a permanent solution to the PWM problem with cameras and modern trucks. This installs on the camera wiring so you don't have to carry around an adapter like the # FR87PR. Both do the same thing.

Any big trips coming up with your travel trailer before the end of summer?

expert reply by: Robin H

12V PWM Filter
(click to enlarge)

Bryant A.

8/22/2025

Same issue. I had a 42’ 5th wheel no camera issues ever. We just downsized to a 31’ Brinkley I275 and I’m getting sporadic signal loss on my Furrion vision s. Why is this happening? Same tow vehicle as the 5th wheel. 2020 F350 Lariat

Robin H.

8/23/2025

@BryantA you had the Vision S on the previous trailer as well? If it was a different system and now you have the Vision S it is probably the PWM interference and either adapter above is the solution. If you had this camera system before and now you are having issues it could be a loose antenna or a power issue so I would start by making sure the antenna is secure. You can test for 12V but if it is new you might ask Brinkley to take a look since everything should be under warranty.