Do You Carry the MB Sturgis Regulator with 2' Hose Connected Model Number 102M?
Updated 08/12/2025 | Published 08/04/2025 >
Products Featured in This Question
Question:
I have a MB Sturgis regulator that is permanently connected to a 2ft supply hose. The Model is a 102M. 30psig. I cant seem to find this as one piece anymore. Does it exist? Or do I need to purchase the regulator and hose as seperate pieces? If so, can you cross reference which two parts I need to make this? Thank you.
asked by: Dean M
Expert Reply:
Hey Dean,
The MB Sturgis Model 102M regulator with the built-in 2-foot hose (30?psi) isn’t available anymore as a single unit. But you can recreate it by picking up the parts separately. You’ll want to grab:
- MB Sturgis Single Stage Propane Regulator # 108072
- MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 2' # 100473-24-MBS, or with back check # 100575-24-MBS.
I was checking out some customer photos of this regulator installed, and noticed a few were mounted wrong. Just a heads-up, make sure the drain hole is pointing down so it can actually do its job. You probably already know that, but figured it couldn’t hurt to mention. I added a pic of the drain hole just in case.
What kind of camper is this going in? Do you need any fittings for the other side of the regulator, or do you already have that part? Please feel free to respond directly to the email that you receive with a picture if you do, so I can make sure we get you the complete set-up you need.
Product Page this Question was Asked From
MB Sturgis Propane Pigtail w/ Back Check - Type 1 x 1/4" Male Inverted Flare - 2'
- Propane Fittings
- Hoses
- Pigtail Hoses
- 2 Feet Long
- Type 1 - Female
- 1/4 Inch - MIF
- MB Sturgis
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center That Has Brakes and Hubs
- Q&A: What Size Pipe Does the LaSalle Bristol UniGuard Waterless P-Trap part # LSB24FR Fit?
- Q&A: What is Difference Between 3,000 and 3,500 lb Trailer Brake Assembly
- Q&A: Does Tire Linc Pro TPMS Monitor Temperature
- Q&A: PSI And BTU Rating For The JR Products Propane Pigtail JR84MR
- Q&A: Cover Needed For A 2-Stage RV Propane Regulator
- Q&A: What Is The Height Difference Of A Solera RV Awning When Retracted Or Extended
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Mount a Truck Bed Camper
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing





Dean M.
8/12/2025
Thank you so much for your help. I really appreciate the tip on mounting direction. I'm unsure if I need the Back-Check or not, but suppose getting one with it cannot hurt the operation at all. Thanks again, Dean