How Long Is the BTR Spindle TRU44FR From Inner Seal Edge To Start Of Threads?
Updated 08/07/2025 | Published 07/11/2025
Question:
Looking for replacement hubs for 60+ year old boat trailer. Spindle looks close to a BTR style, however the length of the bearing section is 2.57 inches from the inner edge of grease seal transition to the start of the threads. What is the length of this area on a standard BTR spindle?
asked by: Jim B
Expert Reply:
Hello Jim, thanks for reaching out. For the BTR E-Z Lube Spindle # TRU44FR the length from the inner edge of the seal to the start of the threads is 3-3/16".
It sounds like your hubs are the old-style "short" hubs which are now obsolete. The best option would be to replace your spindles, or to replace the entire axle with something more modern/standard.
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Video: Review of CE Smith Trailer Fenders - No Step - CES83WR
- Shop: CE Smith Single Axle Trailer Fender - 9" Wide x 28" Long x 11" Tall - Qty 1
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: What are the Diameters of the CE Smith Spindle Axle CES38WR?
- Q&A: Replacement Hubs for 2000 Coleman Sedona
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 7 Common Questions Everyone Has About Trailer Tires
Jesse M.
8/7/2025
Hey Jim, how did it go with replacing your spindles or axle? I'm curious to know if you found a good solution for your old boat trailer. Your experience could really help others facing similar challenges!