bing tracking image
Q & A Icon

What Wiring and Brake Controller do I Need for My 2015 Honda Odyssey to Tow 12X6 V-Nose Trailer?  

Updated 08/15/2025 | Published 07/08/2025

Question:

Hi, I will be pulling a 12X6 V nose single axel trailer equipped with e-brakes with a 2015 Honda Odyssey Touring. I have towing wiring installed in the Car but I need an e-brake controller and possibly some wiring. Could you recommend everything that I need so that I can install it on my minivan? Thanks, Cazn you recomend the

0

Expert Reply:

Hello Dan,

Happy to get the parts you need.

Sounds like you already have the 4 flat wiring like the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118521. What you will need to do is build on top of that wiring by installing the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. I attached an install video on a 2014 for you to check out, you will need to run a power wire from your battery, with a couple of amps along the way, and a brake wire from the front to the rear.

For a brake controller I would go with the Tekonsha Voyager Trailer Brake Controller w/ Plug-In Harness - 1 to 4 Axles - Proportional # TK29ER. I attached an install video for this as well, you will need to splice in the wiring since the Odyssey does not come equipped with a plug-in for a vehicle specific pigtail.

What do you plan on hauling in the trailer?

expert reply by:
0
Kate F
ETBC& Wiring Diagram
ETBC& Wiring Diagram
(click to enlarge)
Kate F. profile picture

Kate F.

8/15/2025

Hey Dan, How did the installation of the brake controller and wiring go on your Odyssey? I'm curious to know if everything worked out smoothly for you, as it could really help others in a similar situation.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>