Replacement Bearing Kit for a 2019 K-Z - Durango Half-Ton D256RKT
Updated 06/17/2025 | Published 06/05/2025
Products Featured in This Question
Question:
I have a 2019 kz Durango half ton model 256rkt and Im trying to determine what wheel bearings and seals I will need. Is there some kind of numbers I need to get off the axles or hubs to make that determination? The axels are showing as 5200.
asked by: Joel
Expert Reply:
Hey Joel, thanks for reaching out!
You'll either need the Bearing Kit # BK3-310 which comes with a seal with a 2.125" ID or the Bearing Kit # BK3-300 which comes with a seal with a 2.250" ID. I believe the 2.125" seal ID is more common, but you'll either need to let me know the brand and serial number of your axles (found on a sticker in the middle of the axle) so I can verify it with the manufacturer, or you'll need to pull a hub and measure the spindle where the seal rides in order to know which seal you need.
Are those parts needing to be replaced, or are you just getting them in advance?
Product Page this Question was Asked From
Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing LM67048 and 25580
- Race 25520 and LM67010
- 5200 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Bearings and Grease Seals for 2024 Outdoors RV Black Stone 260KVS
- Search Results: bearing packer lubricants sealants adhesives
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Search Results: trailer hubs and drums
- Search Results: 13398~do
- Search Results: tire and rim
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Search Results: trailer bearings races seals caps
- Search Results: dexter axles
- Search Results: dexter bearing seal
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Bearing Kit, LM67048/25580 Bearings, GS-2125DL Seal
- Shop: Rack'Em Fitz-All Enclosed Trailer Ladder Rack
- Shop: Grease Seals 10-36 (pair)
- Q&A: Replacement Parts for Atwood Landing Gear Legs
- Q&A: Replacement Parts or Assembly for Landing Gear of 1998 Gulfstream Innsbrook
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans
- Q&A: Looking For Bearing Kit For 2017 EZ Loader Trailer With 5,200 lb Axles
- Video: Let’s Check Out the LED Dimmer Rocker Switch
- Video: All About the RV LED Light Side-Slide Dimmer Switch
- Video: An In-Depth Look at the Dimmer Rocker Switch
- Q&A: Bearing Replacements for Dexter 5,000 lb Trailer Axle
- Article: Most Popular Wheel Bearings
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Q&A: Correct Dexter Hub and Drum Assembly for 5,200 lb Axles and 010-036-00 Grease Seals
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
Joel
6/13/2025
Thanks I was looking to for parts for future maintenance.