What Is The Difference Between 119251 and 119250KIT?

Question

Question:

Could you tell me the difference between these two products on your website? ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit - 119251 ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit - 119250KIT The latter is 20 bucks cheaper, but I cant find a clear difference otherwise. Thanks, Theo

asked by: Theo

0

Expert Reply:

Hey Theo,

The only difference between # 119251 and # 119250KIT is that the # 119250KIT comes with a circuit tester included. In my opinion, installation will be pretty difficult without the tester , and it happens to be the cheaper one. I recommend going with the # 119250KIT for your setup. Otherwise they are the same exact wiring harness, one has a tester one does not.

What vehicle are you installing this on?

expert reply by: Nick S

0

Theo

6/2/2025

Thanks Nick -- the vehicle is a 2025 Chevy Equinox EV.

Nick S.

6/2/2025

@Theo Solid vehicle! Definitely recommend the # 119250KIT for you, its cheaper and its going to have what you need to make the install that much easier. Let me know if you end up having any questions during the install for that.

Answer 1

Hello David, thanks for reaching out. There are a few things you will want to check here. The first will be to make sure the module has a good ground. You may need to sand the ground area to get rid of any paint or corrosion that could be causing a…

view full answer...

Answer 2

Hey John. I can confirm that the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item #119251 will definitely work with your 2018 Mercedes-Benz Metris. It will provide you with a 4-way connector.…

view full answer...

Answer 3

Good question, Kurt! It took me a minute to figure it out, but the is one very minor difference. That being, the #119250KIT includes an added circuit tester (see pictures below). The actual wiring part ( #119251 ) is exactly the same for both parts.…

view full answer...

Answer 4

Hey Kevin! The Draw-Tite Hitch item #DT66KV is going to sit higher than the Curt Hitch item #C89RV when it is installed on the 2024/2025 Chevrolet Equinox EV. The crosstube mounts behind the rear bumper instead of to the bottom of the frame so the…

view full answer...

Answer 5

Hi Michael, Yes, it sure does; you were correct, as not only does the Curt Trailer Hitch Receiver #C89RV fit your 2024 Chevy Equinox EV, but so does the Draw-Tite Trailer Hitch Receiver #DT66KV.

view full answer...

Answer 6

The Tow Ready #118329 T-One vehicle wiring harness you referred to is indeed the correct trailer wiring harness for your 1999 Dakota. The trailer wiring harness plugs inline with the vehicle wiring harness that feeds the truck's taillight…

view full answer...

Answer 7

A good compatible pole-tongue adapter for you and your Curt TruTrack Weight Distribution System #C17499 is the Reese Pole-Tongue Adapter #RP3280. Since this pole adapter has a capacity of 7,500 lbs GTW and 750 lbs TW, it will also help you avoid…

view full answer...

Answer 8

I reached out to my contact at Tekonsha and there are a few things that could be causing the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT you installed on your 2014 Audi AllRoad to have…

view full answer...

Answer 9

Hey Barlow! The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit #SH95QR includes the 2" x 2" receiver for accessories (like a bike rack). It also comes with the towing kit which has the ball mount with a 2" ball, safety…

view full answer...

What Is The Difference Between 119251 and 119250KIT?

Continue Researching