Looking For New Grease Seals For Load Rite Trailer
Updated 05/15/2025 | Published 05/13/2025 >
Question:
Looking for hub grease seals for a Load Rite LR-AB23T5200102LTB1
asked by: John T
Expert Reply:
Hello John, thanks for reaching out. We should have a seal for you, but I would need a bit more information from you first.
If you can tell me the weight capacity of your axle, that will help a lot to narrow things down. If you can remove a wheel there should be a part number cast on your hub and usually we can use this to look up seal and bearing info. If you cant find a part number your best bet will be to measure the OD and ID of your seal with a micrometer. There may be a number stamped on the seal, but they can sometimes be hard to make out.
Hit the reply button below and get me that info. I am happy to look into it and make a recommendation.
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.72 Inch I.D.
- 2.57 Inch O.D.
- etrailer
more information >
Continue Researching
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Recommended Grease Seals For Dexter 9919860 3,500lb Axles
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement Seal Recommendation for Dexter 010-004-00


John
5/14/2025
Jesse, Thanks, will do. I'm two states away from my trailer today but will be back home next week. Once I get my boat in the water I'll drop a wheel and look for the requested P/N's. John