Can I Replace the Leaf Spring on My Boat Trailer with a Flat End Leaf Spring?
Updated 09/26/2025 | Published 05/02/2025 >
Question:
I have a single axle boat trailer with broken springs. Can I replace 1 3/4 x 30 radius end springs with flat end springs?
asked by: John C
Expert Reply:
Hello John,
Great question. If you have a double eye leaf spring on the trailer, then you will not be able to replace it with the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long # e49SR.
What kind of leaf spring do you have on your set-up? What is the axle capacity? What is the measurement from eye to eye with the weight off the spring? It is normal to have a measurement that is longer than what you need as they do stretch over time. I attached some images to show where to measure the leaf spring. Please reply with those answers so I can get you the right leaf spring.
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2900 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: lugs
- Search Results: open eye trailer leaf springs
- Search Results: 1/2" lug nuts
- Search Results: 25 1/4 leaf spring
- Search Results: rust resistant leaf spring
- Video: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles Review
- Video: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles Feature Review
- Video: The Low-Down on the etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles
- Article: How Long will the Axles Last on my Boat Trailer?
- Search Results: trailer tires and wheels
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: Are Shackles Necessary For A Single Axle Utility Trailer?
- Q&A: Are Leaf Spring Measured When Loaded Or Unloaded?
- Q&A: Does a Trailer with Two 3,500 Pound Axles have a Gross Capacity of 7,000 Pounds
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Loadstar ST205/75D14 Bias Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,700-lb Trailer Axles - 26-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Hub/Drum for a Shorelandr Boat Trailer
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Video: Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs Review
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Q&A: Determining If Open Eyed Slipper Leaf Spring Is Needing Replaced





Kate F.
9/26/2025
Hey John, did you have a chance to check the type of leaf spring and the axle capacity on your trailer? I'm asking because I want to make sure you get the right replacement and help others in a similar situation.