What Suspension Upgrade Parts do I Need to Replace the Suspension on 2021 Imagine 2500rl?
Updated 09/26/2025 | Published 04/30/2025 >
Products Featured in This Question
Question:
I have a grand design 2021 Imagine 2500rl that Id like to replace springs and add an upgraded equalizer kit along with wet bolts. What all do I need?
asked by: Callen
Expert Reply:
Hello Callen,
According to my research the 2021 Grand Design Imagine 2500RL comes with (2) 3,500 pound axles. Since I do not have a database that supplies me with what is put on what trailer, you will need to check the measurements on the parts you are replacing.
- Leaf springs: should be 25 1/4", you want to measure with the weight unloaded (sometimes best to jack it up to get the weight off), they do stretch over time so you might get a longer measurement like 26". You will want 4 of the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long # DX23CR.
- Shackle strap kit: I am showing that yours are 2 1/4" from so you will want the kit you were looking at, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR.
- Equalizer: I found that you have the 33" wheelbase, I would still measure your current ones to make sure they are close to the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K # MR89DR. I attached an image for reference.
- U-bolt kit: It is recommended that you do not reuse your U-bolts as they do stretch overtime, you will need 2 sets of the CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc # CE23002
Once you’ve taken your measurements, feel free to comment below with your findings (especially if the axle rating differs) so I can help you confirm fitment. As mentioned earlier, my part suggestions are based on research rather than a manufacturer-supplied database.
Getting things all geared up for a big trip? If so, where are you headed?
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media




Continue Researching
- Search Results: trailer leaf springs
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long - EMCO
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Wet Bolt Kit for Tandem Axle Trailer With Dexter Equalizer K13-142-02
- Q&A: How to Choose Correct Replacement Leaf Springs and Equalizers for a 2021 Coachmen 259FKDS
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Q&A: How to Determine Correct MORryde CRE3000 Equalizer Upgrade
- Q&A: Want To Upgrade From CRE 3000 Suspension On 2023 Grand Design Momentum 336M
- Article: How to Raise Your Travel Trailer Height
- Q&A: Can I Go With A Higher Capacity Spring On My Keystone Trailer?
- Q&A: Is It Worth Upgrading to MORryde AllTrek 4000 From CRE3000 on Jayco 5th Wheel Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Trailer Wiring Diagrams


Kate F.
9/26/2025
Hey Callen, did you have a chance to measure the parts on your Grand Design Imagine? I'd love to hear if the suggestions worked out for you, as it could help others looking to upgrade their trailer suspension.