Dimensions for the Trailer Valet JXC 2K Trailer Jack

Question

Question:

Can I get a spec sheet on TV54FR Looking if for dimensions Shaft OD Travel of foot Height above frame connection plate Frame connection plate OD Thank you

asked by: Lee

0

Expert Reply:

Hey Lee, thanks for reaching out!

The Trailer Valet JXC Trailer Jack # TV54FR has the following dimensions:

Shaft OD - 2-1/4" for outer tube - 2" for inner tube
Travel of foot - 14" of leg travel
Height above frame connection plate - 13" from top of mounting bracket to top of jack
Frame connection plate OD - the mounting plate has a 5-1/4" diameter

Let me know if you have any other questions!

expert reply by: Jon G

0

Answer 1

I recommend replacing your jack with our Electric Jack #EJ-3520-BBX. This is a simple jack without the bells and whistles like you are looking for. You get a light, electric jack and manual override should the electric motor die. The jack will bolt…

view full answer...

Answer 2

Hi Todd, I do have a drill-powered A-frame jack for your enclosed trailer that meets all of your needs, and what I recommend for you is the Lippert Quick Drop Tongue Jack #LC733926. The #LC733926 just requires a 3/4" socket which you can use…

view full answer...

Answer 3

Hi Jan; we don't have any that are 8" when retracted so the Trailer Valet JXC Trailer Jack #TV54FR you looked at is going to be the best option. The distance from the bottom of the bracket to the bottom of the foot retracted is 9-1/8".…

view full answer...

Answer 4

Hey Randy, the Trailer Valet Drill-Powered Stabilizer Jack #TV68FR that you referenced is very stable and would do a great job getting rid of the movement you described when people are walking your in RV. I messed with this stabilizer a little bit…

view full answer...

Answer 5

Hey Daniel, when the etrailer Dual-Pin Two-Speed Square Tube Jack #e45YV that you referenced is fully retracted it's overall height is 29-1/2 inches.

view full answer...

Answer 6

To verify that the Trailer Valet JXC Trailer Jack #TV54FR will fit your 2018 Nucamp Tab400 you will need to verify that the opening for the a-frame jack on your Tab has at least a 2-1/4" opening. The JX2#TV54FR is enough for your Tab as the…

view full answer...

Answer 7

Yes, the Trailer Valet JXC Trailer Jack #TV54FR can be mounted with the crank handle off the front. This jack has a round mounting plate with multiple hole locations allowing for a forward or side facing.

view full answer...

Answer 8

The Dutton-Lainson A-Frame Trailer Jack #DL22530 is currently our only manual A-Frame tongue jack with a 2" outer tube. The Lippert Quick Drop Tongue Jack #LC733926 that supersedes your 423192 jack along with our other jacks have all gone to the…

view full answer...

Dimensions for the Trailer Valet JXC 2K Trailer Jack

Product Page this Question was Asked From

Continue Researching