Do You Have a Flat Tow Plug-N-Play Wiring Harness for a 2024 Ford F-150?

Question

Question:

Do yall have a flat tow wire kit,2024 f150 regular tail lights, back up sensors, plug n play like to 20 uses.thanks.

asked by: Scott M

0

Expert Reply:

Hello Scott,

We do have wiring that will work for your 2024 Ford F-150, but it’s not a plug-and-play option like you were hoping for. I recommend the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord # RM-15267. While I don’t have an install video specific to the 2024 model yet, I’ve attached one for a 2019 so you can get a good idea of what the install process looks like.

I also recommend adding the Roadmaster Battery Charge Line Kit for Towed Vehicles # RM-156-25 to ensure your truck’s battery stays charged while you're towing, giving you peace of mind when you arrive at your destination.

Are you new to flat towing or just getting a new vehicle set up? If you need recommendations for a braking system, tow bar, baseplate, or safety cables, I’d be happy to help!

expert reply by: Kate F

0

Scott M.

4/17/2025

Thanks. I have a 2020 i usually tow but want to have a back up tow vehicle

Reply

Kate F.

5/1/2025

@ScottM Always a good idea to have a back-up. If you have any other questions, you know where to find us. -Safe travels =)

Reply

Answer 1

Hey Doug! The Curt RVi Series Towed Battery Charger+ (TBC+) for Flat Towing #RVI74FR actually installs on the vehicle side so it will go in your 2025 Ranger Raptor. Your Jayco probably has a charge line already, which would be a 12V line running…

view full answer...

Answer 2

The original Falcon tow bar, the Falcon 5250, has been discontinued for a few years now and was replaced by the Falcon 2, #RM-520 with upgraded components. Otherwise it functions basically the same was as the original Falcon. Both are RV mount tow…

view full answer...

Answer 3

The Demco Air Force One Flat Tow Brake System #DM54YV is the kit specifically designed for 2019 and Newer Spartan K2 400 RVs which come prepped with the Safe Haul from the factory.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Robert! Thanks for reaching out. We do have a wiring harness available for your vehicle! It's the Curt Powered Tail Light Converter #C59236. I recommend the etrailer Trailer Hitch Receiver #e66ZV, it's the easiest to install plus it has a…

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 9

Hey Curtis! Yes, the etrailer Trailer Hitch Receiver #e98845 comes with the fishwire/bolt leader. All of the hardware pictured below, including the fishwire, will come with the trailer hitch. This is confirmed to fit your 2018 Dodge Journey. Do you…

view full answer...

Answer 10

Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…

view full answer...

Answer 11

Daren, for your 2024 Ford F-150 Raptor you are going to need: - A base plate kit, like the etrailer Invisible Base Plate Kit #e86YR, - A set of tow bars, like the etrailer XHD Non-Binding Tow Bar #e94ZR, - A braking system, like the Roadmaster…

view full answer...

Answer 12

Hey Gary, For the wiring you'll need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267. This will transfer your motorhome's traffic signals to the tail lights of your Bronco. If you find that you have variable voltage tail…

view full answer...

Do You Have a Flat Tow Plug-N-Play Wiring Harness for a 2024 Ford F-150?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching