Does Going to Trailer Leaf Spring with More Leaves Increase or Decrease Height of Trailer
Updated 04/09/2025 | Published 04/08/2025 >
Question:
I currently have the DX75CR 7,000 lb 6 leaf on my trailer. Would switching to the DX74XR 8,000 lb 7 leaf increase or decrease my trailer height?
asked by: Henry
Expert Reply:
Hey Henry, that's a great question but the answer is that it depends...it depends on if your axle is above the leaf spring or below it.
If your axle is above the leaf spring it wouldn't affect the trailer height. If below it would raise it. Since each leaf is about 1/2 inch thick the height difference would be right around 1/2 inch if you went with the # DX74XR since it's a 7 leaf spring vs. a 6.
Product Page this Question was Asked From
7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 8000 lbs
- 1-3/4 Inch Wide
- 7 Leaf
- 24-7/8 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Search Results: trailer leaf springs
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Q&A: Ram OEM Brake Controller Issues With Hydrastar Electric Over Hydraulic Trailer Brakes
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Changing Spring Hangers To Raise Or Lower A Trailer
- Shop: 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long
- Video: Hands-On with the Dexter Trailer Springs Over-Under Conversion Kit
- Video: The Low-Down on the Equalizer for 2" Wide Slipper Springs
- Video: Detailed Breakdown of the Rear Hanger for 2" Wide Slipper Springs
- Q&A: Replacement 30K Gooseneck Coupler That is 36 Inches in Length
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: 5-Leaf Slipper Spring for 7,000-lb Trailer Axles - 26-1/2" Long - EMCO
- Article: Trailer Lighting Requirements
- Video: Detailed Breakdown of the Ram Gooseneck Coupler w/ Load Bearing Pin
- Video: All You Need to Know About the Ram Gooseneck Coupler w/ Load Bearing Pin
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Round - 2-5/16" Ball - 30K
- Search Results: magnets
- Q&A: What Is The Difference Between The etrailer e54SR And Dexter DX23CR Leaf Springs?
- Q&A: Correct U-Bolts For 3,500Lb Dexter Axle
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Q&A: 4-Leaf Spring That Fits 2020 Grand Design XLS Imagine 22RBE
- Video: A Closer Look at the Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Search Results: 9/16 inch stud trailer hubs and drums
- Search Results: 7k hubs
- Search Results: springs
- Search Results: luggage rack
- Search Results: lc279684


Henry
4/8/2025
My leaf spring is under the axle. So then it would increase the height? Also, is there a difference in curvature between the 2 models that could affect the height??