Looking For Replacement For TDE 46310A Torsion Hub
Updated 10/27/2025 | Published 03/24/2025
Question:
TDE part number 46310A Torsion hub. looking for replacement. Can you cross reference this part?
asked by: Walter M
Expert Reply:
Hello Walter, thanks for reaching out. We may have a hub that will work for you, but I was not able to find any references for the part number you provided, so more information is needed.
Your best bet will be to pull a hub and remove the bearings. Each bearing should have a number stamped on the edge, or you can measure the ID with a caliper. Also measure the ID of your seal, and check the hub bolt pattern.
If you can provide me with all that info, I am happy to look into it and see if we have a hub for you.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Replacement Lower Spring for Rack'Em Double Barrel Trailer Tailgate Lift Assist - Qty 1
- Shop: Kodiak 13" Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Q&A: What Is The Difference Between 7K Hub/Drums From etrailer And Dexter?
- Q&A: Can A Load Range G Tire Be Installed On The Lionshead Aluminum Siberian Trailer Wheel LH78MR?
- Q&A: Looking for Preassembled and Greased Trailer Hub/Drum for Dexter 7,000 lb Trailer Axle
- Q&A: Looking for Front Jack Leg Replacement for Lippert Ground Control 3.0 of 2019 Highland Ridge MBH 371
- Q&A: What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR
- Article: Trailer Wiring Diagrams
- Q&A: What Kind of Grease is Used in Your Pre-Greased Hubs? What Kind Can I Use?
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Jesse M.
10/27/2025
Hey Walter, were you able to get the bearing and seal measurements from your torsion hub? Once you have those details, I can help confirm if one of our hubs will be the right match. Let me know what you find so we can narrow it down.