Replacement Hubs and Bearings for Dexter Axle

Updated 03/25/2025 | Published 12/20/2024

Question:

Have Dexter axle p-15. Model SLR. SERIAL D 6722491. Looking for bearings and hub replacements.

asked by: Wayne

Expert Reply:

Hi Wayne, I sent this off to Dexter on Friday I'm just waiting to hear back from them. Sometimes it takes a little longer on axles with the old metal axle tag so it is possible I won't get a response until after Christmas. I will update you once I have the answer.

expert reply by: Robin H

Wayne

12/23/2024

Thank you sir. Appreciate you. Merry Christmas.

Robin H.

1/4/2025

@Wayne Merry Christmas and Happy New Year. Dexter responded yesterday afternoon and you have a #10 Torflex with a standard 3,500 lb bearing combination. The # BK2-100 you were originally looking at would work for bearing replacement. Assuming you want a 5 on 4-1/2 bolt pattern, you can use the # AKHD-545-35-EZ-K for a hub and drum or # AKIHUB-545-35-EZ-K for an idler hub. Both come with bearings and are pre-greased.

Wayne K.

3/22/2025

@RobinH or could you tell me a compatible axle to replace the one I have as mentioned above. Thanks

Robin H.

3/25/2025

@WayneK I would contact Dexter directly and ask them about a replacement. We don't carry torsion axles. You can replace the spindle with one like the # TRU74FR but it is probably best to just replace the entire axle. You're going to have to take a spindle to an axle shop to make sure it is properly welded on which is usually comparable to the cost of a complete replacement.