Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This TruRyde hub assembly is built for 7,000-lb agricultural axles and comes with everything ready to go. You get the inner bearing (JL69349) and race, outer bearing (LM67048) and race, grease seal, grease cap, and six 1/2"-20 threaded wheel bolts included. The races come pre-installed in the hub, so you can mount it without pressing or hammering anything in place. It’s a full solution that saves time when replacing or building up farm trailer hubs.
Keeping bearings properly greased makes all the difference in how long a hub lasts. This assembly includes a built-in grease fitting that lets you add lube quickly without tearing things apart. You can top off the grease right through the fitting, keeping the bearings smooth and protected from wear between workdays.
This idler hub is made specifically for non-braked agricultural trailers and is rated for 3,560 lbs per hub at a maximum speed of 20 mph. The 6 on 6" bolt pattern and 4.62" pilot hole diameter match common heavy-duty farm setups. Built as part of TruRyde’s standard grade line, it’s a dependable piece of gear you can count on for everyday hauling and field use.
The hub fits agricultural spindles like TRP SP-888175-105, SP-888200-125, or SP-888200-140. With a wheel offset of 1.12" and a grease cap flange diameter of 2.446", it’s engineered for direct compatibility with those spindle types—no guesswork needed when you’re swapping out old parts or setting up a new axle system.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a brief look together at this agricultural trailer hub assembly. Now, this hub is designed for use on your 7,000 pound trailer axles with agricultural spindles without brakes. On your screen, I am including the model numbers of the TRP spindles that this assembly is going to work with. So this is going to be a great assembly to consider for your farm trailers. And as you can see right here, we do have a grease Zerk fitting that's going to make for fast and easy maintenance and lubricating.
We have these six 1/2-inch by 20 threaded wheel bolts that are included and also the grease seal, the grease cap, and the bearings are gonna come with this assembly. And on your screen, I am listing the information about the bearings and the races and the seal. The races are pre-installed into this assembly, so you can see the races here. But as for that inner bearing that we have right here, as we have engraved on the bearing itself, maybe you can see that there. This is going to be a JL69349 inner bearing.
It's gonna fit into place right there. And then for our outer bearing, as we have engraved there, this is an LM67048, and that'll fit into place right there. And then the grease seal is AG-GS-25661625SL. And then I have the race information there for you as well. And again, those races are pre-installed into this assembly.
And the bolt pattern is a six on six inches. And in case you don't know the first number in the bolt pattern, is the number of bolts that we have here. And then that second number is the diameter in inches of the circle on which those bolts sit. So to determine the bolt circle diameter on an assembly with even numbers, you're just going to measure from the center of one bolt to the bolt directly across, and that'll give you that measurement. The weight capacity at 20 miles per hour is 3,560 pounds.
The pilot hole diameter is 4.62 inches, and the grease cap flange diameter is 2.446 inches. And this has an offset of 1.12 inches. Well, I think that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Put my order in and it was here in less than 2 days. Everything fit exactly like it should. Extremely satisfied!!
Excellent service and telephone support staff was very helpful.
Hard to find hub assembly but they managed to find one and received it within days.
Thanks
It was a hard to find hub but fit perfectly on my tender tank trailer. Well built.
THIS WAS A CROSS FROM ANOTHER NUMBER BUT BEARINGS WON'T FIT
Great product, fit perfectly. I really liked the addition of a grease zerk for easy servicing.
Item was used and damaged
Worked great
item fit perfectly, was shipped promptly, and came with all needed components.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Victoria H.
1/27/2025
Hi Michael, this shouldn't have arrived to you like this. Let me get this taken care of for you.