Lock Recommendation for BulletProof Hitches Aluminum Adjustable 2-Ball Mount

Question

Question:

Can this be locked?

asked by: Josh

0

Expert Reply:

Hey Josh!

Yes, you can lock the BulletProof Hitches Aluminum Adjustable 2-Ball Mount # BPH97MR to your hitch receiver by using the Locking Kit # BPH34FR. This comes with a lock for the hitch receiver as well as the adjustable part of the platform so you can have full confidence that your ball mount won't suddenly walk off.

expert reply by: Jon G

0

Jon G.

11/17/2025

Hey Josh, did the locking kit work well with your BulletProof hitch setup? Knowing how secure it feels could help others looking for the same peace of mind.

Answer 1

I have the perfect option for you to secure the BulletProof Hitches 2-Ball Mount part #MD204, the InfiniteRule Locking Pins for BulletProof Ball Mount part #34061674-D which was designed specifically for this ball mount. It has three locking pins,…

view full answer...

Answer 2

We can get your 2002 Toyota Tacoma set up with a hitch and the other parts needed for towing your trailer, and let's start with the best option for a trailer hitch that fits your truck: - etrailer Trailer Hitch Receiver #e64AR This hitch has a…

view full answer...

Answer 3

Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part #SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?

view full answer...

Answer 4

The center hole to center hole distance between the hitch pin hole of the Fastway #FA49-00-5600 adjustable ball mount and the holes that the ball platform mounts to is 5-1/8 inches. The distance between the center of the trailer ball and the holes…

view full answer...

Answer 5

A 5/8" pin is the most common diameter used for a swing away tongue. There are different length pins for different height frames. The only one we currently carry is for a 5" tall frame, for this you will use a Pin #F500336. Be sure to…

view full answer...

Answer 6

Hey Bruce, thanks for reaching out. I went out to our warehouse and measured one of the Weigh Safe Hitch w/ Built-In Scale #WS66ZR. It has two hitch pin holes, so depending which one you use, the distance from the center of the hole to the back of…

view full answer...

Answer 7

No, it will not you would have to remove the item #C45056 to drop the tailgate. There's actually only one that will work, which is the B&W Tow & Stow 2-Ball Mount item #BW44FR. It is designed to work with the MultiPro Tailgate on your…

view full answer...

Answer 8

If you have a 2-1/2 inch adjustable ball mount like the part #DTSTBM6825-2S which has a standard pin hole for the hitch pin you would want a hitch lock like the part #e98881 which is longer and designed for the larger hitch size.

view full answer...

Answer 9

Hello Greg, Great question, and yes level towing is important. The average height for a mid-size to full-size travel trailer is 22 to 28 inches, the average height for an F-350 with 4 wheel drive is 20–24 inches, with that being said you will most…

view full answer...

Lock Recommendation for BulletProof Hitches Aluminum Adjustable 2-Ball Mount

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching