Does etrailer Carry Bearings
Updated 11/17/2025 | Published 12/07/2024 >
Question:
Hello, I just bought a couple of off size trailer caps 1.943. Would also like to change out the bearings as well. Do you carry those. This is a small homemade trailer.
asked by: Rick D
0
Expert Reply:
Hi Rick; we do carry bearings but I will need to know what size bearings you have to see if we have a replacement. I went ahead and attached a link below to all of our available bearings below for your reference. You can filter them by part number and inner diameter.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.94 Inch O.D.
- 1.94 Inch
- 2000 lbs Axle
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Grease Cap Recommendation for Hub with 1-15/16 inch Hub Bore
- Q&A: Do You have Grease Caps for a 1.935 Bore Diameter Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Axle Upgrade For Ironton 5 X 8 Utility Trailer
- Q&A: Replacement Bearing Kit for TDE 46845 Hub
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Grease Cap Recommendation for Trailer Hub with 1.938 inch Bore
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)


Robin H.
11/17/2025
Hey Rick, were you able to find the right bearing size for your homemade trailer? Knowing what worked could help others trying to match bearings with those 1.943 caps.