Do You Have a 1 1/2" X 1 1/2" Trailer Axle For Jet Ski Trailer?

Published 12/04/2024

Products Featured in This Question

CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc

(1073)

$26.59

CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K

(47)

$282.08

CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K

(57)

$411.84

Question:

i have a broken 1 1/2 x 1 1/2 jet ski trailer axel broken hub to hum outside measurement is approx 56 3/4 to 57 inchs wo you carry this item?

asked by: Frank

Expert Reply:

Hello Frank.

I have something that might work for you but you are going to want to double check your measurements. CE Smith Trailer Axle Beam with Standard Spindles - Galvanized # CE33201GA (if you need new hubs too and have a 5 on 4 1/2" bolt pattern, use # CE33201GA-HUB ), this axle is rated for 1,800 pounds, the hub face to hub face is 57 1/2", and the spring center is 46 1/2". I have included an image of these measurements, I have also included a help article on how to measure your current axle as well. It is recommended to changed your U-bolts as well as they stretch over time, you will want the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc # CE23102.

expert reply by: Kate F

Axle measurements
(click to enlarge)

Frank W.

12/4/2024

i think the axel on this was replace and the wrong size i measured the leaf springs and center to center is approx 43 inchs

Kate F.

12/4/2024

@FrankW If that is the case, if the hub face is correct then you can always get new spring seats welded on in the correct spots, we unfortunately do carry them for square axles. You might be better off trying to find an axle somewhere else that meets all your specifications.