Replacement Leveling System Control Panel for 2022 Thor Magnitude

Question

Question:

Will the LC175225 replace the LCI control panel on my 2022 Thor Magnitude?

asked by: Donald W

0

Expert Reply:

Hey Donald, so I don't have a way to look up what type of control panel your 2022 Thor Magnitude has but if what you have looks like the part # LC175225 then yes it would work as that would indicate this is a match basically. But if you have something that looks different let me know and send me a picture and I'll take a look at it.

expert reply by: Jameson C

0

Jameson C.

12/15/2025

Hey Donald, what did you find out about the control panel on your Thor Magnitude—did the replacement panel end up being a match? Your update could make it easier for the next person checking compatibility on their setup.

Answer 1

It sounds like you may have a bad Pressure Switch #LC142927 or connection on your Level Up system. With the Jacks Down light on your Panel #LC175225 but the jacks are not dropping it sounds like a wiring issue. I recommend checking the wiring…

view full answer...

Answer 2

Hi Jeff; if you have an electronic leveling system like the Ground Control 3.0 #LC358590 or #LC675817 you can swap your #LC175225 control pad to the digital #LC421484 control pad. If you have a hydraulic leveling system the only option is the…

view full answer...

Answer 3

When your Lippert Ground Control 3.0 #LC358590 has a reading that says "Comm Error" it is referring to the communication between the controller and touch pad. You will need to check your harness to ensure it is connected properly and there…

view full answer...

Answer 4

I recommend disconnecting 12V electrical power from the main system control panel for a few minutes. Usually about 15-minutes without power does it. This will reset the system and should operate as normal. Once reconnected to power if you still have…

view full answer...

Answer 5

Hey Joe! I reached out to Lippert and found that the replacement touch pad is the #LC175225 and then for the controller you need #LC53ED. You will also need a new pump wiring harness. The correct one depends on whether or not your pump runs just the…

view full answer...

Answer 6

It sounds you are looking for the Lippert 4 Point Control Panel W/ Amp Connector part #LC175225. The correct wiring harness to use with this control panel is the Replacement Lippert Components 4-Point Leveling System Control Brain Wiring Harness part…

view full answer...

Answer 7

Hey Chantelle, thanks for the part number you found as based on seeing that the correct replacement control panel is the part #LC175225.

view full answer...

Answer 8

If your 2022 Thor Quantum KW29 has the Lippert 4 point leveling system and the old panel looks just like the part #LC175225 then this would be the correct replacement. Unfortunately we don't know what leveling systems they would have put in your…

view full answer...

Answer 9

Hey Martin! The #LC44UJ is really similar but will not work as a replacement for your 175225. What you need instead is the Replacement Lippert Control Panel with Amp Connector for 4-Point Leveling System #LC175225 which is the same as what you have…

view full answer...

Answer 10

Hey Jeff, thanks for reaching out! I spoke with my contact at Lippert and they said the Replacement Lippert Control Panel #LC175225 you currently have on your setup is what you'll need to replace it with. So there isn't a replacement or an…

view full answer...

Answer 11

We've checked with Lippert in the past and they have told us that the Kwikee Level Best control panel can be replaced with the Lippert Control Panel part #LC77CJ.

view full answer...

Answer 12

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

view full answer...

Replacement Leveling System Control Panel for 2022 Thor Magnitude

Product Page this Question was Asked From

Continue Researching