Replacement Oil Cap For 2007 Tennessee Tandem Axle Trailer With Turbo Lube Hubs
Updated 01/05/2026 | Published 09/23/2024
Products Featured in This Question
Question:
I have a 2007 Tennesse tandem trailer with turbo lube hubs. My yellow caps are starting to leak and Im looking for new yellow caps or the best replacement for them. Any help would be greatly appreciated. Shad
asked by: Shad D
Expert Reply:
Hello Shad, thanks for reaching out. We should have an oil cap that can replace the yellow caps on your turbo lube hubs. I will just need to know the weight capacity of your axle, and the hub bore diameter for your hubs. For example, the Kodiak XL ProLube Oil Bath Hub Body and Cap # xlprolube1980 will fit hubs with a 1.98" center bore which is typical for the 3,500 lb axles.
If this is not exactly what you have just let me know your specs and I am happy to look into it and see if we have anything. The link below will show you our full selection of oil caps.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.32 Inch
- 5200 lbs Axle
- 6000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Surge Brake Actuator To Replace Tie Down Model 125 12,500LB Drop Actuator
- Search Results: bearing buddy
- Search Results: 12500 lbs gtw brake actuator
- Shop: Demco Surge Brake Actuator - Drum - Zinc - 2-5/16" Ball - 12,500 lbs
- Search Results: 25 inch hitch
- Q&A: Bearing Buddy Bearing Protectors To Replace Turbo Oil Bath Caps
- Shop: Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 8" Drop, 8" Rise - 18K
- Search Results: brake actuator
- Shop: Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Search Results: flexible brake hose
- Shop: Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball
- Shop: Demco Surge Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 12.5K
- Shop: Dexter Zinc-Plated Brake Actuator w/ Drop - Disc - 2-5/16" Ball - Bolt On - 12,500 lbs
- Video: Flash Simple 2-Ball Mount w Chrome Balls Review
- Search Results: replacement trailer tongue
- Q&A: Replacing Master Cylinder in Titan Model 10 Actuator on Boat Trailer
- Q&A: Is There a Bearing Buddy Kit for a Turbo Lube 48334 Oil Kit
- Search Results: gs 1719dl
- Video: Titan Master Cylinder Assembly Installation
- Video: Hands-On with the Demco Hydraulic Brake Actuator-DM8101222
- Video: Breaking Down the Kodiak XL ProLube Oil Bath Hub Body and Cap
- Q&A: Help With Installing Dexter DX7.5L A-60 Brake Actuator On Boat Trailer
- Video: All About the Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Q&A: What is the Outer Diameter and Thread Pitch of Bearing Buddies # BB2441T-SS
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
Jesse M.
1/5/2026
Hey Shad, did you get a chance to measure your axle capacity and hub bore to see if the Kodiak XL ProLube cap fits your turbo lube hubs? Once you have those specs, I can help narrow down the best match. Your update could make it easier for others with the same trailer setup.