How to Determine Bearing Kit For 2022 Wildcat 5th Wheel Trailer
Updated 01/05/2026 | Published 09/18/2024
Question:
Looking for a wheel bearing complete kit for a 2022 Wildcat fifth wheel.
asked by: Steve S
Expert Reply:
Hey Steve,
I'm sure we have a bearing kit for your 2022 Wildcat 5th wheel trailer, though we don't have any way of knowing off-hand or cross-referencing what bearings you need, and there are quite a few different models so I was unable to narrow down the . So in order to find the correct kit you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings ride, like in the photo I added.
It would also help to know your axle capacity (which should be stamped on the axle itself); for example, if you have a 3,500 lb axle your bearings are L44649 (1.063" inner diameter) and L68149 (1.378" inner diameter) you would use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle # BK2-100.
I have added a link below to our entire selection of bearing kits and bearings for you once you find this info.
(click to enlarge)
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Wiring Diagrams
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
Jameson C.
1/5/2026
Hey Steve, were you able to find the bearing numbers or measure your spindle on the Wildcat fifth wheel? Once you had that info, did the bearing kit options line up with what you needed? Your update could make it easier for others tracking down the right fit.