Are Taller Hangers Available For A 1-3/4" Wide Slipper Spring
Updated 01/12/2026 | Published 09/05/2024
Question:
I have 1-3/4 slipper springs on single axle trailer. I need to get more clearance above the wheel. Is there a hanger extension available?
asked by: Max M
Expert Reply:
Hey Max,
The tallest hangers we currently offer are 1-1/2" tall from center of the bolt hole to the top. The # APS3SE you were looking at is as well and would include new bolts for the slipper springs.
Are your springs mounted above or below the axle? If it's mounted below you can remove the u-bolts and switch it above the axle if you have a square tube axle or weld on new spring seats if you have round tube axle.
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 1-3/4 Inch
- Single Axle
- Redline
more information >
Continue Researching
- Q&A: Can Trailer Suspension Hangers be Bolted On
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Video: All You Need to Know About the CE Smith Front Hanger Bracket for Trailer Slipper Springs
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Q&A: Do Slipper Spring Rear Hangers Require Bushings
- Q&A: Single Axle Hanger Kit Recommendation for Use with Slipper Spring SP-264275
- Shop: Single-Axle Trailer Hangers for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Q&A: Replacement Wet Bolts For A MORryde CRE3000 Suspension
- Q&A: Bolt On Slipper Springs for 1-3/4" Wide Slipper Springs on a Small Single Axle Trailer
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Q&A: Will Slipper Spring Hanger # 115706S Work with a 2 or 3 Slipper Spring
Robin H.
1/12/2026
Hey Max, what ended up working to get more clearance above your trailer wheel? Sharing how your setup turned out could help others trying to adjust their slipper spring hangers too.