How Full Does The Dexter DX Series Electric Over Hydraulic Brake Actuator Need To Be

Question

Question:

How do you check the fluid levels on Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi. I stuck my finger in and it was dry, dont want to over fill.

asked by: Ron H

0

Expert Reply:

Hey Ron,

The Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes # K71-651 requires a 3/8" air gap below the fill port. I went out to the warehouse and checked one out and there honestly isn't any kind of marking or anything to really go off of so you'll have to eyeball it.

expert reply by: Kevin C

0

K71-651 Fill instructions
(click to enlarge)

Answer 1

You will want to start by following the troubleshooting tips in the manual for the electric over hydraulic actuator, #K71-651. I have outlined them here for you: 1. Verify that the trailer and tow vehicle are wired according to the electrical…

view full answer...

Answer 2

The Dexter Trailer Hub and Drum Assembly - 9,000-lb to 10,000-lb - 8 on 6-1/2 - Oil Bath - Non-ABS Drum #8-430-5UC3 does have replacement parts so you can absolutely purchase the seal and o-ring separately from the entire hub. The seal is the…

view full answer...

Answer 3

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

view full answer...

Answer 4

Hey Sean, yes you can definitely use a stand alone system like a single-acting hydraulic pump to power a hydraulic trailer jack like the single action Stillwell lineup we just started carrying. For the Stillwell Atlas IV 10K Hydraulic Trailer Jack w/…

view full answer...

Answer 5

The information we have that states that the Dexter Electric Over Hydraulic Actuator part #K71-651 will work with the 2015 GMC Sierra integrated brake controller came straight from Dexter so we know it will fit and work well.

view full answer...

Answer 6

Hey Bob, the Dexter electric over hydraulic brake actuator part #K71-651 can be used with the integrated brake controller of a 2012 GMC Sierra but you would need to use the adapter part #DX35FR.

view full answer...

Answer 7

Hey Tj! The #PWE4228SC are not designed to fit 225/70R19.5 tires. For the equivalent chain that will fit your tire size you need the pewag Dually Tire Chains w Cams #PWE4221SC. The Kodiak Disc Brakes #KOD53FR use 9/16"-18 wheel bolts like…

view full answer...

Answer 8

We do have a wiring diagram for you! Whether you have the 1,000 psi Dexter DX Series #K71-650 or the 1,600 psi Dexter DX Series #K71-651 the wiring will be the exact same. I have attached a wiring diagram and review videos for you to check out. Just…

view full answer...

How Full Does The Dexter DX Series Electric Over Hydraulic Brake Actuator Need To Be

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching