Replacement Trailer Hub that is Pre-Greased for 2013 Karavan KB-1250-56
Updated 01/27/2026 | Published 08/21/2024
Products Featured in This Question
Question:
Hello, I am hoping you can help me find a correct trailer hub for my 2013 Karavan KB-1250-56 boat trailer. The current hubs are Dexter. I am looking for a spare prepacked hub to carry as a backup. The spindle is straight and the bearings are L44643. The wheels are 12 and the trailer is rated for 1250lbs. Thank you. Kevin
asked by: Kevin H
Expert Reply:
Hey Kevin, you'd want the etrailer hub part # AKIHUB-545-2-LF-2K if you have a 5 lug wheel setup or the part # AKIHUB-440-2-1K for a 4 lug hub. These are both pre-greased options that fit your axle.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Replacement Hub for a Pop Up Camper w/ a 5 on 4-1/2" Lug Pattern
- Q&A: Does Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Have Ceiling Garnish
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Article: Spring Towing Readiness Checklist
- Q&A: Best Replacement for a Wesbar Tail Light 271594
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
Jameson C.
1/27/2026
Hey Kevin, how did the new pre-greased hub work out for your Karavan trailer? Your update could make it easier for the next person looking for a backup hub setup.