Can The Thinline LED Trailer Light # STL64RB Be Mounted With Double-Sided Tape
Updated 01/27/2026 | Published 08/18/2024
Question:
I have a Ford Transit van, can these be mounted vertically using just double stick tape? Or do the need to be mounted using screws?
asked by: Gardiner
0
Expert Reply:
Hey Gardiner,
You could use double-sided tape to mount the Thinline LED Trailer Tail Light # STL64RB, but you'd be a lot more secure with two self-tapping screws. I would use some VHB tape if you want to go that route to ensure it's able to withstand vibration and high temperatures.
expert reply by:
Kevin C
0
Product Page this Question was Asked From
Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 15 Diodes - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Strip Light
- Surface Mount
- Submersible Lights
- LED Light
- 20L x 1W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: What Sealant Should I Use Between an Aluminum Jeep-Style Fender and My Trailer?
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Recommended Optronics Thinline Trailer Light Bar w/ Smoke Lens
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will Replacement Front Jack for Lippert Ground Control 3.0 System Work On 2021 Open Range 5th Wheel?
- Q&A: Red Lens Replacement Sae-a-p2-dot-14 For A 2018 Keystone Camper
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Adding Interior Lights to Trailer and Keep Battery Charged
- Q&A: Electric Brake Compatibility on a Boat Trailer
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
Nick S.
1/27/2026
Hey Gardiner, how did the Thinline LED tail lights hold up with the VHB tape on your Transit? Your results could really help others deciding between tape and screws for their setup.