Recommended Replacement Wheels/Tires and Pre-Greased Hubs
Updated 01/27/2026 | Published 08/15/2024 >
Products Featured in This Question
Question:
2018 Starcraft Satellite 16 KS. Want to make this as much of a plug and play installation as possible. I do not know the bearing sizes or how to determine without taking the old ones off. I want to purchase tire an wheel assembly and pre greased bearing hubs and complete installation all at once. Web site says these fit. Do they?
asked by: Kevin
Expert Reply:
Hey Kevin yes, if we have it fit guided to fit then it fits. For a pre-greased hub and drum assembly, you can use the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-545-35-EZ-K.
The the pre-greased hub assembly # AKHD-545-35-EZ-K works with 3,500 lb axles with #84 spindles that use 10" brake assemblies.
These will be "plug-and-play" and will directly replace your current hubs.
For a tire and wheel assembly, we also have the Kenda Karrier ST205/75R14 Radial Tire w/ 14" Series T09 Aluminum Wheel # AM34659.
These are 205/75R14 sized radial tires that uses a 5 on 4 1/2 bolt pattern, 1/2-20 wheel studs, and has a 2,200 lb weight capacity.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement 10" Electric Brakes For A 2019 nuCamp T@G Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision


Kate F.
1/27/2026
Hey Kevin, how did the plug-and-play setup go with the Easy Grease hub and Kenda Karrier tire and wheel combo on your Starcraft? Your update could make it easier for the next person planning a full hub and wheel replacement.