Looking For Replacement Hub For RVD-H-65535 On A Lippert 4,400 lb Axle

Updated 05/21/2025 | Published 08/13/2024

Products Featured in This Question

TruRyde Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand Assemblies - 7K

(256)

$157.94

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased

(1959)

$112.99

Question:

Looking for a replacement hub for a RVD-H-65535. This is on a Lippert GAWR 4400 axle. 2012 Open Range Light fifth wheel travel trailer. Confused because someone else asked about a replacement for the same hub and the response was for replacement part AKHD-655-35-EZ-K however, the specs say this is for a 3500 axle. Any help is appreciated!

asked by: Lance F

Expert Reply:

Hello Lance. The RVD-H-65535 hub you mentioned uses the same bearing sizes as a standard 3,500 lb axle, only it has a 6 on 5-1/2" bolt pattern. The # AKHD-655-35-EZ-K hub will be the correct replacement as this has been confirmed to work with 4,400 lb axles as well as 3,500 lb axles.

expert reply by: Jesse M

Rob

5/21/2025

Replacement part for Tru ride RVD-H-655? I want manual adjust. 4400 axle.

Jesse M.

5/21/2025

@Rob Hello Rob. The RVD-H-65535 hub you mentioned uses the same bearing sizes as a standard 3,500 lb axle, only it has a 6 on 5-1/2" bolt pattern. The # AKHD-655-35-EZ-K hub will be the correct replacement as this has been confirmed to work with 4,400 lb axles as well as 3,500 lb axles.

Rob

5/21/2025

@JesseM what would be part number for kit with hub and brake assembly manual adjust brakes?

Jesse M.

5/21/2025

@Rob So we do have all those parts just not in an all-inclusive kit. You will need the # AKHD-655-35-EZ-K hubs which are sold individually. Then for the manual adjust brakes use the etrailer Electric Trailer Brakes # AKEBRK-35. These are sold as a pair LH and RH side.