How to Tell if Dexter Hub and Drum Will Fit a 2006 Raytheon M1101 and Work with FJ Cruiser Wheels
Updated 08/19/2024 | Published 08/12/2024
Question:
I have a 2006 Raytheon M1101. I want to replace the hub to match my 2007 Toyota FJ Cruiser 4x4. I’m sure it’s the 6x5.5 wheel hub pattern. I took some photos and will attach below. Will this part fit the trailer?
asked by: Efrain W
(click to enlarge)
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Efrain, thanks for the photos!
From what I'm seeing it does look like the Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ bearings will fit, you'll just want to make sure your spindle measures 2.125" where the grease seal rides in order for this to properly fit.
If your FJ Cruiser has a 6 on 5-1/2" bolt pattern then the wheel should fit just fine on this but you'll need to make sure your trailer fenders and frame will still have enough clearance and won't be rubbing during travel.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer bearings races seals caps accessories and parts
- Search Results: race lm67010 trailer bearings races seals caps
- Search Results: 25520
- Search Results: 15245
- Search Results: bearing buddy 2441
- Shop: Dexter Vault Hybrid Lubrication Kit for 6,000-lb Trailer Buddy Axles
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Camco Stabilizing Base for 20-lb or 30-lb Propane Cylinder
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Video: Ultimate Overview of the Bearing Buddy Bearing Protectors
- Video: Review of Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB77SR
- Video: Bearing Buddy Bearing Protectors Review
- Video: An In-Depth Look at the Bearing Buddy Bearing Protectors
- Video: In-Depth Review of the CE Smith Bearing Protectors w/ Covers for 2.441" Hub Bore
- Video: All About the Bearing Buddy Bearing Protectors
- Q&A: Replacement Brakes and Hub/Drums For a 2007 Airstream Safari Trailer With 5,000LB Dexter Axles
- Q&A: What is Difference Between Dexter Hubs # # 8-201-9UC3-EZ and # 8-201-5UC3-EZ
- Q&A: What Hub/Drums Are Recommended for Timbren 3,500 lb Axle Less System
- Video: Breaking Down the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles
- Q&A: Replacement Trailer Hub for AL-KO 8490 With 6 on 5-1/2 Bolt Pattern
- Q&A: Replacement Hub/Drum and Brake Assemblies for Trailer with AL-KO 8460 Hubs
- Shop: RV Covers
- Shop: RV Exterior Lighting
- Shop: Performance Chip Tuners
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Wiring Diagrams
- Q&A: What Is The Difference Between Dexter Hub/Drum 8-201-5UC3-EZ And 8-201-9UC3-EZ
on Trailer Hubs and Drums
Efrain W.
8/16/2024
Here’s the measurement I got. 2.25in