Will Equal-i-zer Shank # EQ94FR Work With Curt TruTrack Weight Distribution Hitch C17501?

Updated 02/03/2026 | Published 07/31/2024

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW

(638)

$634.95

Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop

(54)

$216.71

Question:

Is the Fastway shank 90-02-4425 compatible with the Curt Weight Distribution hitch 17501? 2011 F250 with 20inch stock pulling 2019 Forest River XLR Boost 31QB 1460 TW 14K GVW The weights are good...I need the 2,5 shank but my rise requirement is 9inch /13inch Rise Curt doesnt make a shank with that /rise... Thank you

asked by: Ken

Expert Reply:

Hey Ken.

The Equal-i-zer # EQ94FR you were looking at will work perfectly with the Curt TruTrack # C17501. They use the same shank hole spacing, and this will get you the rise you were looking for, and will work in your 2-1/2" receiver without needing an adapter.

expert reply by: Samuel C

Samuel C.

2/3/2026

Hey Ken, how did the Equal-i-zer shank end up working with your Curt TruTrack setup on the F250? It sounds like it should have given you the rise you needed. Sharing how it turned out could help others trying to match similar gear.

Ken

2/3/2026

@SamuelC the TruTrack worked great for my 2011 f250 pulling the 2019 XLR Boost Toy Hauler...I would highly recommend owners find a flat surface to do the alignment and set up and the ability to drive the rig and make any adjustments. We used a large school parking lot, and after driving around, we found the needed adjustments.

Samuel C.

2/3/2026

@Ken Good info there! Thanks for the feedback. Luckily here at our campus we have quite a few big level parking lots that make the installs easy, but it is tricky when I am doing these installs in the field to make sure there is somewhere reasonably level to get everything right. You'll find the more of the systems you get a chance to install, the easier it gets to get your adjustments really close the first go around.