MaxxAir Fan Vent Cover for Brinkley Z285

Question

Question:

I just got me a new Brinkley Z285 camper and it has a Maxxair fan that it closes auto. when it rain im looking for the correct size cove that woul allowes the vent to open all the way up. Can you recomend the correct fan cover. Thank you.

asked by: Eduardo R

0

Expert Reply:

Hi Eduardo; congratulations on the new camper. None of the covers will allow the vent to open all the way but that won't be a problem. The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002 you were looking at will fit and is the tallest cover option. Your fan will still operate as intended and will achieve 100% air flow. It is also available in white # MA00-955001 and smoke # MA00-955003.

expert reply by: Robin H

0

Robin H.

2/3/2026

Hey Eduardo, how did the FanMate cover work out on your Brinkley Z285’s Maxxair fan? Did it give you the airflow you were hoping for while keeping the vent protected? Your update could make it easier for others with the same setup.

Answer 1

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

view full answer...

Answer 2

Hey Tom! Great question. The Parkit360 Force Electric Trailer Dolly #PA96VR (5,000 lbs) and #PA46VR (10,000 lbs) will work on an incline. However, if the grade is more than 6% you cannot use the dolly. As long as your driveway is no more than a 6%…

view full answer...

Answer 3

One way to determine the lift and jack height you need would be to measure the jack you currently have on your 2018 Intech Luna RV. If this is not possible, or you still aren't sure, you can also determine the correct jack using the coupler…

view full answer...

Answer 4

Hey Kevin. Thanks for the information and congrats on the new trailer. Two of the Go Power Overlander Expansion Kit item #34282182 is exactly what you need to expand your solar setup to 600 watts. These panels pull 9.57 amps each so your 30 amp MPPT…

view full answer...

Answer 5

When adding the Go Power Overlander Expansion Kit - 190 Watt Solar Panel #34282182 to an existing controller there would be no need to add a fuse.

view full answer...

Answer 6

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 7

Hey Bob, you will want a kit that includes everything including the air box and new thermostat because this year all of the RV AC Units had to move to a new refrigerant and that means the older lower vent assemblies do not work with the current upper…

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

Hey Patrick! The Trimax Universal Anti-Rattle Clamp #TMX66SR will not work well with the 2" shank and reducer sleeve. This is designed for 2-1/2" accessories. The best option is the Blue Ox Hitch Receiver Immobilizer III for 2-1/2"…

view full answer...

Answer 10

The Lippert Waster Master RV Sewer Hose, #LC359724, is designed to be stored in the under bin compartments of RVs. The hose and nozzle will not fit in the bumper style storage tubes. I do have a solution for you. The Valterra Viper RV Sewer Kit…

view full answer...

Answer 11

I went out to the warehouse and pulled the Lippert Waste Master RV Sewer Hose #LC359724 to measure the 90 degree end with the lever and handle. The overall length from the furthest point forward to the end of the handle is 8 inches. The overall…

view full answer...