Is There 5 on 5 inch Hub/Drum that Fits 3,500 lb Timbren Axle Less
Published 07/18/2024
Products Featured in This Question
Question:
Hello Connor, for the question previous. I was wondering about the Tmbren 3500. Can I also put that 5 on 5 hub on it?
asked by: iGotchu C
0
Expert Reply:
Yes, you could use the hub/drum part # AKHD-550-35-EZ-K on a 3,500 lb Timbren Axle Less kit part # ASR3500S06.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Video: All About the Dexter Idler Trailer Axle w/ Hubs
- Video: An In-Depth Look at the Trailer Axle with Idler Hubs
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Shop: Dexter Idler Trailer Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: 3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 25-1/8" Long
- Article: Trailer Wiring Diagrams
- Q&A: Timbren Axle Less Setup for Off Road Camper that Uses Jeep Wheel Bolt Pattern
- Q&A: Can 17" Jeep Wheels W/ 5 on 5" Bolt Pattern Be Used On Off-Road Trailer?
- Search Results: spring perch
- Video: All You Need to Know About the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Hands-On with the Trailer Idler Hub Assembly for 3,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
- Q&A: Correct Leaf Spring Hanger Position for Single Axle Trailer
- Video: Trailer Axle with Idler Hubs Spec Review
- Q&A: Spring Perch that Fits 2,200 lb Trailer Axle 1-3/4 inch Diameter
- Video: TruRyde Trailer Suspension TRSS238 Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Length From Center of Spring Eye to Center of Spring Eye on 4-Leaf Double-Eye Spring
- Q&A: Replacement Brakes And Drums For A 7k Rated Sloan Kwik Load Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/Drum
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
Igotchu C.
7/17/2024
Is there a hub without the need of brakes or do have to use the drum without any brakes installed. I will not be using brakes on this.