Looking For Replacement Wheel Cylinders For 12" Hydraulic Brake Assemblies

Question

Question:

Hello, Im looking for a good quality wheel cylinder to replace the ones on my Standens 12 hydraulic brake units. These are bought in Canada and have the TP-13-1221-ST on them. Can you recommend a good replacement? Thank you! Don M

asked by: Don M

0

Expert Reply:

Hello Don. We do have the Replacement Wheel Cylinder for 10" and 12" Hydraulic Brakes, part # AKBRKR-H7-L for left hand side and part # AKBRKR-H7-R for right hand side. These will work with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO. I am not sure what brand of brakes came on your trailer, but as long as they are made by one of the major brands, or similar to the major brands, the wheel cylinder I recommended will work great.

expert reply by: Jesse M

0

Don M.

7/18/2024

Hi Jesse, Thank you for your help. I will order one wheel cylinder to confirm fitment and if it's good, I'll be ordering more. Again, thank you!

Jesse M.

7/18/2024

@DonM Good idea! Feel free to reach out if there is anything else I can help with. Those major brands I mentioned are quite common so I would be surprised to hear if they don't work.

Answer 1

The replacement wheel cylinder that will work with your Dexter #23-342 left hand brake assembly is part #AKBRKR-H7-L-CR. If you need a replacement wheel cylinder for the right hand side you need part #AKBRKR-H7-R-CR.

view full answer...

Answer 2

There are a few things that could be causing this issue on your brakes. First thing I would check for would be a clog in the brake lines. To do this you will want to bleed the brakes. Second thing it could be is a bad wheel cylinder which would…

view full answer...

Answer 3

We don't have a 7-way splitter like the photo you sent. We instead for applications just like yours recommend using the Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long #A10-7007 or the 10 foot long #A10-7010. This…

view full answer...

Answer 4

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 5

Yes, you can use marine wheel bearing grease in both your boat and utility trailer. It will not hurt anything at all to use marine wheel bearing grease in your utility trailer. The only real difference between the two greases is that the marine wheel…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

The Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K Item #AKFBBRK-7 looks like a similar fit. It sounds like you are just looking for the cylinder so based on the photos I recommend the Replacement…

view full answer...

Answer 8

Hello Mike, thanks for reaching out. The Replacement Shock for Dexter Model 6 and 10 Brake Actuators #T1242600 may work for you, but we do not carry the Gabriel brand, so the information available to me about their parts is limited. Basically, the…

view full answer...

Answer 9

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 10

Hello Darin, thanks for reaching out. I do have a solution for you. What I recommend is the Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00. This is made for trailers with drum brakes, and it attaches to a 2" ball. It does not come with an…

view full answer...

Answer 11

Hello Roy, thanks for reaching out. We do have the 225/75-15 tires but nothing G rated. Our highest rating in that size would be the E range tires you have now. So we would not have a good tire upgrade option for you. As far as the blowouts, are you…

view full answer...

Answer 12

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

view full answer...

Looking For Replacement Wheel Cylinders For 12" Hydraulic Brake Assemblies

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching