Replacement X-Cargo Key 2820

Question

Question:

X-cargo key 2820

asked by: Joel P

0

Expert Reply:

Thule Replacement Key item # THKEYN2820

expert reply by: Jerred H

0

Jerred H.

2/3/2026

Hey, did the Thule replacement key N2820 end up working for your X-Cargo carrier? Knowing how it fit could help others trying to match their keys too.

Answer 1

The VW OEM roof rack was made by Thule. The key you need is indeed the #THKEYN012 you referenced.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 10

Yes, they do John. To add a hitch to your 2026 Kia Sportage hybrid, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It's going to give you…

view full answer...

Answer 11

Hey Mike, thanks for reaching out. Yes, it will! The Curt Mounting Bracket for 4-Pole Flat Trailer Connector #C42CR will match right up with the Curt No-Drill Bracket #C57202. You won't have to drill any new holes. The picture I included shows…

view full answer...

Answer 12

Yes, it will Amanda and congrats on the new SUV. The Curt Trailer Hitch item #C94WR has been confirmed to fit all models of the 2026 Kia Sportage including your hybrid. The Curt item #C94WR is a class III hitch with a 2" receiver. It is custom…

view full answer...

Replacement X-Cargo Key 2820

Product Page this Question was Asked From

Continue Researching