Can 4-Way Power Reverse Lights on Trailer
Updated 02/03/2026 | Published 07/05/2024
Products Featured in This Question
Question:
Hello. I just installed the tow hitch and wiring harness on my 2014 town and country. Everything works but the reverse lights. Brake lights ok, blinkers ok and getting both power to the 4 pin harness. No issue before. Does the wiring harness not come with a pin or wire that connects for the reverse lights? I’m asking ahead of time as I just did it today. I have not troubleshot much yet except to make sure power is going to the 4 pin harness, which it is.
asked by: James K
Expert Reply:
Hi James; the 4-way is not designed to run power to your reverse light circuit. What you can do is add the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat # C57187. The 5th pin connects to the reverse lights on your vehicle which can send power to the lights on the trailer. You will also need a 5-way connector for the trailer side like # HM47910 and # 12-1-1 to run wire to the reverse lights on the trailer along with butt connectors # 05732-2 to make your connections.
Product Page this Question was Asked From
Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat - Vehicle End
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 4 Flat to 5 Flat
- Plug and Lead
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Will the Hollywood Racks Crosstrack Bike Rack for 1 Bike Work with Fenders?
- Q&A: Should I Get Frame Mounted or Bed Mounted Camper Tiedowns for my 2014 Ford F-250 Super Duty
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What Wire Does Red Wire of Roadmaster Brake Lite Relay Connect To
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Options For Replacing An Atwood AT82543 Surge Brake Actuator
- Q&A: Is There a Coiled 5-Way to 5-Way Trailer Wiring Adapter
- Q&A: Buzzing Noise from Vehicle to Vehicle Tail Light Converter Part # C56196
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Maintenance Schedule
Robin H.
2/3/2026
Hey James, how did things go after adding the 5-way adapter and wiring it to your reverse lights? Knowing what worked might help others setting up a similar trailer connection.