Converting to Disk Brakes on 2010 Keystone Cougar 318SAB
Updated 02/03/2026 | Published 07/02/2024
Products Featured in This Question
Question:
Good day I have a 2010 Keystone Cougar 318SAB and desire to convert the brake system to rotors. Does your team or could your team generate a recommended list of parts for this conversion? Best regards Jim
asked by: James D
Expert Reply:
Hi Jim; I can definitely help you get the right parts but I'm going to need some more information. You will have to find your axle capacity to make sure you get the right brakes. More than likely this can be found on the axle tag on either of your axles. If I had to guess you have 5,200 lb axles on there now. Based on that information I recommend the following:
-Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube # KOD69FR
-Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20' # 20TA-BLKIT
-Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi # HBA16
You will already have a 7-way from your electric brakes, along with a brake controller. If you don't already have a breakaway kit you will want to add one like the # 20400. If you find that your axle is a different capacity and not a 5,200 or 6,000 lb axle please let me know in the comments below.
Product Page this Question was Asked From
Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Disc Brakes For A 2009 Broce RJT350 Sweeper
- Q&A: Disc Brake Kit for Load Rite 5 Starr Boat Trailer
- Q&A: Comparing Maxx and Stainless Steel DeeMaxx Disc Brake Kits
- Q&A: Parts Needed To Install The Dexter Disc Brake Kit K2R712S
- Q&A: Replacement 6-on-5-1/2 Idler Hub Kit to Replace Hub 82655
- Q&A: Replacement Disc Brake Kit for a Myco Boat Trailer w/a 6 on 5-1/2 Lug Nut Pattern
- Q&A: Replacement Disc Brakes for a Coyote Aluminum Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Boat Trailer Guides: Which are the Best?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Hard Tonneau Covers vs Soft Tonneau Covers
Robin H.
2/3/2026
Hey Jim, were you able to confirm the axle capacity on your Cougar so you could move forward with the disc brake conversion? Knowing what you found would help others planning a similar upgrade. Your update could make it easier for the next person with the same setup.