Looking For New Hubs, Bearings And Seals For A 2002 REMEQ Trailer
Updated 02/03/2026 | Published 06/26/2024
Products Featured in This Question
Question:
I am looking to change my boat trailer hub, bearings and seal. I have a 2002 REMEQ trailer with a 2002 Princecraft boat. I reached out to the trailer manufacture, and they gave me some good information on what I would need to buy, except the seal is not easy to find. I am wondering you have a product that would fit what I need. The following is the information they gave me replace the hub. The hubs are standard, the most important it to choose a 5 studs hub with the same bearing inside 1’’1/16 L44649 with the same seal AF1789. The capacity of the hub is 2000 Lbs. I had three tore blowouts last year in one trip and just want to replace the hub, bearings and seal. I am hoping you have a product I can use. Dennis Poduch
asked by: Dennis M
Expert Reply:
Hello Dennis. We do offer hubs that use the # L44649 inner and outer bearing, like the Easy Grease Trailer Idler Hub # AKIHUB-545-2-G-EZ-2K. This is a 2,000 lb rated hub with the standard 5 on 4-1/2" bolt pattern. This hub comes with bearings, seals, races and lug nuts. It uses a # 10-9 seal which has a 1.987" OD and a 1.5" ID. I was not able to find any references for the seal number AF1789 you provided, so I do suggest you measure your seal to make sure it matches. If you seal is a different size, just let me know and I am happy to see if we have anything for you.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Disc Brakes for 2006 McClain (MCCL) Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How Are The Dexter Vault Bearing Protectors Measured?
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Q&A: What Leaf Springs, U-Bolt Kit, Equalizers, and Wet Bolt Kit do I Need for My Triple Axle Set-Up?
- Q&A: Is A ST205/75R14 Tire The Modern Equivalent Of A F78-14ST Tire?
Jesse M.
2/3/2026
Hey Dennis, did you get a chance to measure your seal and see if the Easy Grease hub ended up matching your trailer setup? Knowing how that fit worked out could really help others replacing similar hubs.