Recommended Leaf Spring Suspension System for a 2012 Nissan Xterra

Question

Question:

Can you put 2 helper leafs on 1 side? And do they go on the upper side or lower side of the leaf springs?

asked by: Joe

0

Expert Reply:

No, you can not and the Hellwig EZ-550 Helper Springs item # HE72FR mount on top of the leaf springs. However, they do not fit a 2012 Nissan Xtrerra. The only option we have for a leaf spring system for your Nissan are the RoadActive Suspension Custom Leaf Spring Enhancement Kit item # RAS4529-XT for 4WD or item # RAS4529-XT for 2WD.

expert reply by: Jerred H

0

Answer 1

Hello Dave. The Hellwig Above Axle Helper Springs will definitely help add support and stop the vehicle from sagging. The Hellwig EZ-550 Helper Springs - Above Axle #HE72FR is what I recommend for your 1996 Toyota Tacoma. While these will help with…

view full answer...

Answer 2

Yes, it does. The Hellwig EZ-550 Helper Springs item #HE72FR installs directly above your 2018 Toyota Tacoma's leaf springs. You will not need to modify anything.

view full answer...

Answer 3

The Hellwig EZ-550 #HE72FR installs above the leaf spring behind the axle on your 2023 Toyota Tacoma. See the picture below.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Leaf Spring Suspension System for a 2012 Nissan Xterra

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching