Possible Replacement Brakes for a 2018 Grand Design Imagine 2600RB
Published 04/17/2024
Question:
I have a 2018 2600RB Grand Design. Bought it used... Little to no brakes left on it. What brake assembly would be a good replacement? Thanks
asked by: Marshal B
Expert Reply:
Hey Marshall, it looks like your 2018 Grand Design has 3.5K axles so you could theoretically use the etrailer Electric Trailer Brakes # AKEBRK-35.
To verify, what you're going to have to do is pull your existing hubs off and look for part numbers stamped on the bearings. These numbers will tell us specifically what brakes you can use for a replacement, and will confirm whether the above brakes will work or not.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Correct Replacement Hubs/Drums and Brakes for Grand Design Imagine 2800BH
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Looking For Trailer Brakes And Hubs For Dexter RT 3,500 lb Axle
- Q&A: Replacement Brakes And Hubs For A 3,500 Pound Lippert Hub 126003
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Highest Capacity Electric Brakes for a 4 Bolt Brake Mounting Flange
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Will etrailer Electric Brakes AKEBRK-35 Fit 2016 Jayco Jay Flight 24RBS?
- Q&A: Recommended Braking Hub w/ a 5 on 4-1/2 Lug Pattern and Brake Assemblies for a Lippert 3,500 lb Axle