Does The Ramp for The Hollywood Racks Destination E Bike Rack # HLY66ZR Mount To The Rack?

Question

Question:

is the ramp stored in the rack itself for the Hollywood Destination and how long is it?

asked by: Mary F

0

Expert Reply:

The ramp for the Hollywood Racks Destination E Bike Rack # HLY66ZR does not mount on the rack and would need to be carried in your vehicle. It can extend up to 46" long as it telescopes.

expert reply by: Bud M

0

Answer 1

For your 2023 Kia Sorento I recommend the Curt Class 3 Hitch #C37RV. This will be a 2" receiver rated for 4,000 lbs towing and 600 lbs of tongue weight. For a 4 flat wiring harness you can use the #TK26FR. As far as install, I would call all of…

view full answer...

Answer 2

Hello Joseph (and Judy). I can confirm that, yes, the Curt #C37RV hitch will indeed fit the 2023 Kia Sorrento Hybrid. This hitch is confirmed for all models of the 2023 Sorrento and this includes the Hybrid model. You will find a link to our install…

view full answer...

Answer 3

The Hollywood Racks Destination Bike Rack #HLY66ZR that you referenced has a 70 lb per bike weight capacity. Your bikes weighing 65 lbs would easily work just fine. The way these racks are rated you do not have to worry about weight capacity unless…

view full answer...

Answer 4

I have a few different e-bike racks for you to check out and the differences really just boil down to the weight of the rack and the features it comes with. The first recommendation I have is the Hollywood Racks Destination E Bike Rack #HLY66ZR which…

view full answer...

Answer 5

While the Thule T2 Pro XTR Bike Rack #TH83JV is a great bike rack, since your Scott e-bikes have the front fenders you'll either need to remove them to use the rack or we'll need to look into another bike rack. The reason why it isn't…

view full answer...

Answer 6

The Hollywood Racks Destination E Bike Rack #HLY66ZR measures 15.62" from the center of the hitch pin hole to the furthest part of the rack when it's folded up (see attached photo). If you pair this with a wall mount like the Swagman X Mount…

view full answer...

Answer 7

Bike rack manufacturers have different approaches to how they design their racks and while Yakima has their OnRamp part #Y36FR approved for use behind a flat towed vehicle Hollywood Racks does not rate their #HLY66ZR for this application. Based on…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does The Ramp for The Hollywood Racks Destination E Bike Rack # HLY66ZR Mount To The Rack?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching