Replacement Hub/Drum, Brakes, & Bearings For Camper With 3,500 lb Axle
Updated 03/08/2024 | Published 03/07/2024
Products Featured in This Question
Question:
I have a 2003 Coleman/Fleetwood Utah PopUp Camper with at 3500 Pound Axle and Dexter 10 inch x 2-1/4 electric brakes with 13 inch tires on a 5 on 4-1/2 lug pattern. Im interested in replacing my brakes, bearings, and drums and was wondering what setup would fit best.
asked by: Ryan
Expert Reply:
Hi Ryan; thanks for all that info and we do have exactly what you need to replace the hub and drums, electric brakes, and bearings on your pop-up camper with a 3,500 lb axle.
Just note the hub and drum comes with the bearings already, so you don't have to buy them separately, but I'll list out the bearing kit in case you want that for when you replace them down the road.
- Trailer Hub and Drum Assembly # AKHD-545-35-K
- Electric Trailer Brakes - Self-Adjusting # AKEBRK-35-SA
- Mounting Hardware for 10" Brake Assemblies # BRKH10B
- Hub Bearing Kit # BK2-100
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: 2003 Coleman Fleetwood Utah Replacement Brake Assemblies and Bearings
- Shop: Trunk Bike Rack
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes