Replacement for 3,500 lb Lippert Axle With 85" Hub Face Measurement
Updated 03/06/2024 | Published 03/05/2024
Products Featured in This Question
Question:
Hey there, Im looking to purchase a new axle with the brake assembly attached. I just checked the axle I need to replace. Its a Lippert LCI35-SB-85-68.5-NOSP-OS-L-545-7242-30PT. I read on Lipperts site that the 3rd number in the code is hub face to hub face length. I dont see any 85 on your site. Do you carry this length? Thanks!
asked by: Jesse P
Expert Reply:
What you read is correct. You have a 3,500 lb Lippert axle with an 85" hub face and a 68-1/2" spring center measurement. I do have a solution, but unfortunately we do not carry a standard axle with these measurements. What I can offer is the Timbren Axle-Less Trailer Suspension w Electric Brakes # A35RS545E. This system is universal so it fits any frame width. It would also replace your existing leaf springs and upgrade you to an independent suspension.
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Q&A: Replacement for Lippert 3,500 Lb LCI35-SB-85-68.5 Axle
- Video: Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks Review
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Q&A: Does Race Need To Be Replaced If Installing New Bearings
- Q&A: Is There Trailer Bearing Kit With Bearings L44649 & L68149
- Q&A: Is There a Way to Tighten the Fabric and Fix the Tension on a Solera RV Awning?
- Q&A: Is There a Special Tool Or Trick To Installing Trailer Grease Cap On Trailer Hub?
- Q&A: How to Retighten the Awning Fabric On a Solera Powered Awning
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Timken Replacement Bearing and Race Set #17 - L68149 and L68111
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Trailer Wheel Center Cap Plug - Chrome
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: dust cap rubber plug
- Search Results: trailer suspension parts
- Video: Detailed Breakdown of the Ventline Vanair Trailer Roof Vent w/ 12V Fan
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
on Trailer Axles
