Can 30k Curt Fifth Wheel Leg Kit Fit Curt PowerRide Fifth Wheel Hitch Head

Question

Question:

Can I use this new Curt powerride head with my existing Curt 16024 legs? They are obviously both rated for 30K.

asked by: Jack S

0

Expert Reply:

The PowerRide head part # C56WR can't be used with the current Curt leg kit you have now unfortunately so if you wanted a PowerRide that fits the GM rail kit the solution you'd need is the complete hitch part # C36WR.

expert reply by: Jameson C

0

Answer 1

While we don't currently have an installation video available the Curt PowerRide 5th Wheel Trailer Hitch for GM Towing Prep Package #C36WR is super simple to install. The legs of this hitch are specifically designed to drop into the puck system…

view full answer...

Answer 2

The reason the Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C36WR is listed as being compatible with only 8 foot bed lengths is because of turning clearance issues. A six foot bed typically requires a sliding hitch and a…

view full answer...

Answer 3

For me the Curt PowerRide 5th Wheel Trailer Hitch #C36WR does appear to be the best value. The built in lube plates help to ensure that you protect the hitch from getting marred up when connecting to the 5th wheel. And unlike some other manufactures…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 10

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 11

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Answer 12

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Can 30k Curt Fifth Wheel Leg Kit Fit Curt PowerRide Fifth Wheel Hitch Head

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching