What Crank Handle Goes With The Lippert Winch Extension LC1345411?

Question

Question:

What crank handle do you use with the Lippert winch extension LC1345411?

asked by: Mark M

0

Expert Reply:

You can use the Replacement Crank Handle # LC285324 with the Lippert Winch Extension # LC1345411. Keep in mind that you will also need a cotter pin such as part # 165649 to hold the extension in place, if you don't already have one.

expert reply by: Jesse M

0

Answer 1

Hella Dale. We do have the B&B RV City Water Inlet #BM98RR which can be used to replace the inlet on your Nautilus system. We also have the RV City Water Inlet #372160-85-A-26A which is a different brand, but will still be a suitable replacement…

view full answer...

Answer 2

The Timbren Rear Suspension Enhancement System, part #TDR3500CA is a confirmed fit for your 2015 Ram 3500. The system does come with a 1 inch spacer just in case you need additional length. I have attached a drawing that shows the clearance that you…

view full answer...

Answer 3

Hello Mark, Per the tech at Lippert you are going to want to use AW-32 Hydraulic Fluid, and not an automatic transmission fluid.

view full answer...

Answer 4

We do have something like that. The Lippert Spare Tire Winch with Offset Cable #LC159056 use the Crank Extension for Lippert Spare Tire Winch Assemblies #LC1315411 which attaches to the winch. You would then use the Replacement Crank Handle for…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi Joe, We have a couple options for convection microwaves with an air fryer, and if you can replace your High Pointe EM925AWW depends on the amount of space you have. Your current microwave is 19-1/8" wide x 11-5/16" tall x 14-11/16"…

view full answer...

Answer 10

Hey George, welcome back. I double checked with the manufacturer and the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY38FR is the correct option to replace your MORryde part number SPB72-1621HD. It works with pin weights from…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Crank Handle Goes With The Lippert Winch Extension LC1345411?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching