Does SmartPlug RV Power Inlet Come With 90 Degree Connector

Question

Question:

Do they make this in a 90 degree for the cord? Would put less stress on the cord and the connectors, thanks SmartPlug RV Power Inlet and Connector - 50 Amp - Black Item # SM76FR

asked by: Dave H

0

Expert Reply:

I definitely agree with you there Dave, it would be a very nice option to have, but a 90 degree cord is not something made for the 50 amp SmartPlug RV Power Inlet and Connector # SM76FR.

I will say the way the plug connects does make it a better, more robust overall connection than the standard twist lock. Reason for that is the outside of the SmartPlug completely encompasses the inlet so there's less tension on the plug, and the lid clamps down on the plug for further support. So while a 90 degree cord would be great, I would still go with the SmartPlug over a normal twist-lock.

expert reply by: Kyle S

0

Answer 1

We don't carry in wall RV refrigerators like your Dometic DM2652 RBX so the closest compatible refrigerator we carry would be the Everchill RV Refrigerator w/ Freezer #324-000119. The dimensions I found for your current refrigerator show it being…

view full answer...

Answer 2

Hey Pat, congrats on your new trailer. Since you're converting over to a 50 Amp SmartPlug RV Power Inlet like item #SM56FR, you can use the SmartPlug Marine Power Cord Adapter - 50 Amp Female to 30 Amp Male Twist Lock Connector item #SM43VR This…

view full answer...

Answer 3

Hey Scott! The SoftStartUp Plug-In Soft Start for RVs item #SSR64FR would plug in after the surge protector. What kind of trailer or RV do you have?

view full answer...

Answer 4

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 5

Hey Bryant. The Jensen RV Stereo item #JEN43YR is going to be our closest comparable option to replace your Furrion Dv3300. However, you are going to lose the DVD player. You will also need to widen your cutout though as it is a bit bigger. The…

view full answer...

Answer 6

Hey Chris, welcome back! The Front Runner Slimline II Platform Rack item #FR92ZJ has a 600 lbs capacity. It is highly recommended to check your owner's manual to verify what your F-350's roof is rated for. This platform is confirmed to fit…

view full answer...

Answer 7

Hey Marcus, thanks for reaching out. So, the MORryde Suspension Upgrade Kit for Triple Axle Trailers #MR86ZR is meant to be used with the MORryde CRE3000 equalizer kit which only uses 6 sets of shackle straps instead of 8. There isn't a kit that…

view full answer...

Answer 8

We have really great head units you can use to upgrade from your Furrion DV3300 but Furrion no longer uses the style of connector that the DV3300 came with so it wouldn't be a plug and play install. The part #DV1230BL is the upgraded successor to…

view full answer...

Answer 9

Hello Juan, Thanks for writing in. Ford Ranger wheels can often work with the #E75SR axle because they usually share the same 6 on 5-1/2 inch bolt pattern. Many Ranger wheels are also 16 inches in diameter, which falls right into the size range that…

view full answer...

Answer 10

It is absolutely possible to install a trailer hitch on your 2006 K-Z Escalade trailer; it will only require that your trailer have a box frame, C-channel frame, or I-beam frame that is between 22 inches and 72 inches wide. Should your trailer have…

view full answer...

Answer 11

Since it sounds like you already have a factory or aftermarket over/under kit like the Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 on your 3,500 pound spring axles, the only other option is to replace your existing hangers with…

view full answer...

Does SmartPlug RV Power Inlet Come With 90 Degree Connector

Product Page this Question was Asked From

Continue Researching