Parts Needed to Flat Tow 2006 Chevrolet Trailblazer EXT

Published 01/10/2024

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2209)

$575.00

Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars

(332)

$144.67

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(562)

$1699.49

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3550)

$182.73

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(426)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(677)

$70.40

Question:

I have a 2006 chevy trailblazer EXT What are all the parts I would need to Flat tow I have a roadmaster 85 4321-10 crossbar

asked by: Donald B

Expert Reply:

In order to flat tow your 2006 Chevrolet Trailblazer EXT you will need base plates, a tow bar, safety chains, wiring, and a supplemental braking system. I recommend the following:

-Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 3109-1

-Roadmaster Falcon 2 Tow Bar # RM-520

-RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643

-Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267

-Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR

I don't have any information on a Roadmaster 85 4321-10 crossbar. The current crossbar that would be required for this setup is the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars # 910021-00. If you can send me a picture of the part number and serial number I could double check with Roadmaster for compatibility.

More than likely you will also need a high-low adapter to keep your tow bar level. I have attached an article below which explains how to measure to choose the right adapter. I have also attached a link to all of our high-low adapters for your reference.